Supermicro X14DBT-FAP handleiding
Handleiding
Je bekijkt pagina 86 van 137
UEFI ARM Mirror
If this feature is set to Enabled, mirror mode configuration settings for UEFI-based Address
Range memory will be enabled upon system boot. This will create a duplicate copy of data
stored in the memory to increase memory security, but it will reduce the memory capacity into
half. The options are Disabled and Enabled. The Address Range Mirroring (ARM) feature
supports partial memory mirroring. This feature is CPU-dependent.
Note: This feature is available when "Mirror Mode" is set to Disabled.
Mirror TAD0
Use this feature to enable the mirror mode on entire memory for Target Address Decoder 0
(TAD0). The options are Disabled and Enabled. This feature is CPU-dependent.
Note: This feature is available when "UEFI ARM Mirror" is set to Disabled.
ARM Mirror Percentage (Available when "UEFI ARM Mirror" is set to Enabled)
Use this feature to set the percentage of memory space to be used for UEFI ARM mirroring for
memory security enhancement. The default setting is 2500.
Correctable Error Threshold
Use this feature to specify the threshold value for correctable memory-error logging, which sets
a limit on the maximum number of events that can be logged in the memory error log at a given
time. The default setting is 512.
Note: This feature is available when "Memory PFA Support" is set to Disabled.
Leaky Bucket Low Bit
Use this feature to set the Low Bit value for the Leaky Bucket algorithm, which is used to check
the data transmissions between CPU sockets and the memory controller. The default setting is
12.
Leaky Bucket High Bit
Use this feature to set the High Bit value for the Leaky Bucket algorithm, which is used to check
the data transmissions between CPU sockets and the memory controller. The default setting is
13.
ADDDC Sparing (Available when populating 1Rx4, 2Rx4, and 4Rx4 DIMMs and when
"Memory PFA Support" is set to Disabled)
Select Enabled for Adaptive Double Device Data Correction (ADDDC) support, which will not
only provide memory error checking and correction but will also prevent the system from
issuing a performance penalty before a device fails. Please note that virtual lockstep mode will
86
X14DBT-FAP/-FLAP: UEFI BIOS
Bekijk gratis de handleiding van Supermicro X14DBT-FAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14DBT-FAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14774 MB |
