Supermicro X14DBT-FAP handleiding
Handleiding
Je bekijkt pagina 81 van 137
Package C State Control Menu
►Package C State Control
Note: This submenu is available when “Power Performance Tuning” is set to BIOS Controls
EPB.
Package C State
Use this feature to optimize and reduce CPU package power consumption in the idle mode.
Please note that the changes you've made in this setting will affect all CPU cores or the circuits
of the entire system. The options are C0/C1 state, C2 state, C6 (non Retention) state, No Limit,
and Auto.
Note: This feature is NOT available when "Workload Profile" is set to I/O, Telco NFVI, Telco
NFVI-FP, or Telco FlexRAN.
LTR IIO Input
Use this feature to set the MSR 1FCh Bit[29]. The options are Take IIO LTR input and Ignore
IIO LTR input.
CPU1/CPU2 Core Disable Bitmap Menu
►CPU1/CPU2 Core Disable Bitmap
Note: The submenu of CPU2 Core Disable Bitmap is available when your motherboard
supports dual processors.
Available Bitmap[0]:
This feature displays the available Bitmap[0].
Available Bitmap[1]:
This feature displays the available Bitmap[1]. It is available when the number of CPU cores is
greater than 128.
Available Bitmap[2]:
This feature displays the available Bitmap[2]. It is available when the number of CPU cores is
greater than 192.
Disable Bitmap[0]:
Enter 0 to enable this feature for CPU Core Bitmap[0]. Enter FFFFFFFFFFF to disable CPU
Core Bitmap[0]. Please note that the maximum CPU cores are available in each CPU package
and at least one core per CPU must be enabled. Disabling all cores is not allowed. The default
81
X14DBT-FAP/-FLAP: UEFI BIOS
Bekijk gratis de handleiding van Supermicro X14DBT-FAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14DBT-FAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14774 MB |
