Supermicro X14DBT-FAP handleiding
Handleiding
Je bekijkt pagina 80 van 137
Hardware P-States
If this feature is set to Disabled, system hardware will choose a P-state setting for the system
based on an OS request. If this feature is set to Native Mode, hardware will choose a P-state
setting based on the OS guidance. If this feature is set to Native Mode with No Legacy Support,
system hardware will choose a P-state setting independently without OS guidance. The options
are Disabled, Native Mode, Out of Band Mode, and Native Mode with No Legacy Support.
CPU C State Control Menu
►CPU C State Control
Note: This submenu is available when “Power Performance Tuning” is set to BIOS Controls
EPB.
Monitor MWAIT
Select Enabled to support Monitor and Mwait, which are two instructions in Streaming SIMD
Extension 3 (SSE3) to improve synchronization between multiple threads for CPU performance
enhancement. The options are Disabled and Enabled.
Note: This feature is NOT available when "Workload Profile" is set to Telco NFVI, Telco
NFVI-FP, or Telco FlexRAN.
C1 to C1e Promotion
If this feature is set to Enabled, CPU will run at its minimum frequency for lower power
consumption in the C1 state. The options are Disabled and Enabled. This feature is CPU-
dependent.
Note: This feature is available when "Workload Profile" is set to Disabled.
ACPI C6x Enumeration
Use this feature to configure C6 state or C6 P-state as ACPI C2 or ACPI C3 state. The options
are Disabled, C6S as ACPI C2, C6S as ACPI C3, C6S-P as ACPI C2, C6S-P as ACPI C3, and
Auto.
Note: This feature is available when "Workload Profile" is set to Disabled.
80
X14DBT-FAP/-FLAP: UEFI BIOS
Bekijk gratis de handleiding van Supermicro X14DBT-FAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14DBT-FAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14774 MB |
