Supermicro X14DBT-FAP handleiding
Handleiding
Je bekijkt pagina 120 van 137
Note: For detailed instructions on configuring Security Boot settings, refer to the Security
Boot Configuration User's Guide at https://www.supermicro.com/support/manuals.
Secure Boot
Select Enabled to configure Secure Boot settings. The options are Disabled and Enabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.
►Enter Audit Mode
Select Ok to enter the Audit Mode workflow. It will result in erasing the Platform Key (PK)
variables and resetting the system to the Setup/Audit Mode.
Note: This submenu is available when "Secure Boot Mode" is set to Custom.
►Enter Deployed Mode / Exit Deployed Mode
Select Ok to reset system to the User Mode or to the Deployed Mode.
Note: This submenu is available when "Secure Boot Mode" is set to Custom.
►Key Management
The following information is displayed:
l
Vendor Keys
Note: This submenu is available when "Secure Boot Mode" is set to Custom.
Provision Factory Defaults
Select Enabled to install provision factory default settings after a platform reset while the
system is in the Setup Mode. The options are Disabled and Enabled.
►Restore Factory Keys
Select Yes to restore manufacturer default keys to ensure system security. The options
are Yes and No. Selecting Yes will reset system to the User Mode.
Note: This submenu is available when any secure keys have been installed.
120
X14DBT-FAP/-FLAP: UEFI BIOS
Bekijk gratis de handleiding van Supermicro X14DBT-FAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14DBT-FAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14774 MB |
