Supermicro X14DBT-FAP handleiding
Handleiding
Je bekijkt pagina 106 van 137
Supermicro KMS Server IP address
Use this feature to set the Supermicro Key Management Service (KMS) server IPv4 address in
dotted-decimal notation.
Second Supermicro KMS Server IP address
Use this feature to set the second Supermicro KMS server IPv4 address in dotted-decimal
notation.
Supermicro KMS TCP Port number
Use this feature to set the TCP port number used in the Supermicro KMS server. The valid
range is 100–9999. The default setting is 5696. Do not change the default setting unless a
different TCP port number has been specified and used in the Supermicro KMS server.
KMS Time Out
Use this feature to enter the KMS server connecting time-out (in seconds). The default setting
is 5 (seconds).
TimeZone
Use this feature to set the correct time zone. The default setting is 0 (not specified).
Client UserName
Press <Enter> to set the client identity (UserName). The length is 0–63 characters.
Client Password
Press <Enter> to set the client identity (Password). The length is 0–31 characters.
►CA Certificate
►Client Certificate
►Client Private Key
Use the three features above to enroll factory defaults or load the KMS Transport Layer
Security (TLS) certificates, which are generated by the KMS server, from the file stored in the
USB flash drive as shown below.
106
X14DBT-FAP/-FLAP: UEFI BIOS
Bekijk gratis de handleiding van Supermicro X14DBT-FAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14DBT-FAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14774 MB |
