Supermicro X14DBT-F handleiding
Handleiding
Je bekijkt pagina 30 van 137
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure that
the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are highly
recommended because they ground the motherboard to the chassis. Make sure that the metal
standoffs click in or are screwed in tightly.
Before installing the motherboard in the chassis, carefully read the instructions below.
Notes:
l
To avoid damaging the motherboard and its components, do not use a force greater
than 8 lbf-in on each mounting screw during motherboard installation.
l
Some components are very close to the mounting holes. Take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Tools Needed
Figure 2-1. Driver (1) (Right), Phillips Screws (10) (Middle), Standoffs (10 or As Needed)
(Left)
30
X14DBT-FAP/-FLAP: Component Installation
Bekijk gratis de handleiding van Supermicro X14DBT-F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14DBT-F |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14774 MB |
