Supermicro X10SLE-DF handleiding

95 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 13 van 95
Chapter 1: Introduction
1-5
X10SLE-DF Jumpers
Jumper Description Default
J7 Thermal Throttling Triggered by Power
Fail Enable
Pins 1-2 (Enabled: Thermal Throttling
Triggered by PWR-Failure)
JBT1/JBT2 CMOS Clear for Node 1 (JBT1)/Node 2
(JBT2)
(Off: Normal)
P1-JPG1/P2-
JPG1
VGA Enable for Node 1 (P1-JPG1)/Node
2 (P2-JPG1)
Pins 1-2 (Enabled)
P1-JPME1/P2-
JPME1
ME Recovery for Node 1 (P2-JPME1)/
Node 2 (P2-JPME1)
Pins 1-2 (Normal)
P1-JPME2/P2-
JPME2
Manufacture Mode Select for Node 1
(P1-JPME2)/Node 2 (P2-JPME2)
Pins 1-2 (Normal)
P1-JWD1/P2-
JWD1
Watch Dog Timer Enable for Node 1 (P1-
JWD1)/Node 2 (P2-JWD1)
Pins 1-2 (Reset) (Recommended for
best performance)
X10SLE-DF Headers/Connectors
Connector Description
J8 SMC-proprietary Add-On Card Slot for Power/SIG SATA Interface
J37/J38 Port 80 Connector for Node 1 (J37: P1-PORT80)/Node 2 (J38: P2-PORT80)
Battery (VBAT) Onboard Battery
IPMI-LAN IPMI-Dedicated LAN (shared between Node 1 and Node 2 supported by
the onboard LAN Switch chip)
JKVM1 USB 2.0(x2)/VGA (Monitor)/COM (UART) Connector for front IO support
for remote console redirection or network interface
P2/P1-LAN1 Gigabit Ethernet LAN Port 1 for Node 1 (P1-LAN1)/Node 2 (P2-LAN1)
P2/P1-LAN2 Gigabit Ethernet LAN Port 2 for Node 1 (P1-LAN2)/Node 2 (P2-LAN2)
SATA 3.0 4 SATA (3.0/6 Gb/s) Connections on the HDD backplane
SW1 Power-On/Power-Off Button for Node 1 and Node 2 (PWR BT)
SW2 Node_ID/KVM/LED Switch to provide ethernet access to multiple
devices simultaneously (NODE_SW) (Green: Node 1, Orange: Node 2)
USB 2.0 Front Panel USB 2.0 (See JKVM1)
X10SLE-DF LED Indicators
LED Description Color/State Status
LE5 IPMI Heartbeat LED for Node 1 Green: Blinking Node 1 IPMI: Normal
LE6 IPMI Heartbeat LED for Node 2 Green: Blinking Node 2 IPMI: Normal
LED7 UID (Unit Identier) LED Blue: On Unit Identied
PLED1 Power LED for Node 1 Green: On, Orange: Standby Node 1 PWR On/Standby
PLED2 Power LED for Node 2 Green: On, Orange: Standby Node 2 PWR On/Standby

Bekijk gratis de handleiding van Supermicro X10SLE-DF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkSupermicro
ModelX10SLE-DF
CategorieNiet gecategoriseerd
TaalNederlands
Grootte9957 MB