Supermicro SuperServer AS -3015MR-H5TNR Handleiding (98 Pagina's)

Handleiding

22

Chapter 3: Maintenance and Component Installation

Chapter 3

Maintenance and Component Installation

This chapter provides instructions on installing and replacing main system components. To

prevent compatibility issues, only use components that match the specications and/or part

numbers given.

Installation or replacement of most components require that power rst be removed from the

system. Please follow the procedures given in each section.

3.1 Powering Down the System

Use the following procedure to ensure that power has been removed from the system. This

step is necessary when removing or installing non hot-swap components.

1. Use the operating system to power down the system.

2. After the system has completely shut down, disconnect the AC power cord(s) from the

power strip or outlet and remove the AC power cords from all power supply modules.

3. Disconnect the power cord(s) from the power supply module(s).

4. When performing service on non hot-swap components, remove the system from the

rack and place it on a bench or desk. Do not service with the system extended from the

rack.

3.2 Accessing the System

All the main components of the system (nodes, fans, power supplies) can be accessed without

removing any system covers.

Bekijk gratis de handleiding van Supermicro SuperServer AS -3015MR-H5TNR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.