Supermicro SuperServer AS -3015MR-H5TNR handleiding

Niet gecategoriseerd

Supermicro

98 pagina's

PDF beschikbaar

Handleiding

Chapter 2: Server Installation

Airow

Equipment should be mounted into a rack so that the amount of airow required for safe

operation is not compromised.

Mechanical Loading

Equipment should be mounted into a rack so that a hazardous condition does not arise due

to uneven mechanical loading.

Circuit Overloading

Consideration should be given to the connection of the equipment to the power supply circuitry

and the e󰀨ect that any possible overloading of circuits might have on overcurrent protection

and power supply wiring. Appropriate consideration of equipment nameplate ratings should

be used when addressing this concern.

Reliable Ground

A reliable ground must be maintained at all times. To ensure this, the rack itself should be

grounded. Particular attention should be given to power supply connections other than the

direct connections to the branch circuit (i.e. the use of power strips, etc.).

Important: To prevent bodily injury when mounting or servicing this unit in a rack, you must

take special precautions to ensure that the system remains stable. The following guidelines

are provided to ensure your safety:

• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

• When mounting this unit in a partially lled rack, load the rack from the bottom to the top

with the heaviest component at the bottom of the rack.

• If the rack is provided with stabilizing devices, install the stabilizers before mounting or

servicing the unit in the rack.

• Slide rail mounted equipment is not to be used as a shelf or a work space.

Warning!

Stability hazard. The rack may tip over causing serious personal injury. Before extend-

ing the rack to the installation position, read the installation instructions. Do not put

any load on the slide-rail mounted equipment in the installation position. Do not leave

the slide-rail mounted equipment in the installation position..

Avertissement!

Danger d’instabilité. Le rack peut basculer et provoquer des blessures corpo-

relles graves. Avant d’étendre le rack en position d’installation, lire les instructions

d’installation. Ne pas charger l’équipement monté sur rail de glissière en position

d’installation.

Bekijk gratis de handleiding van Supermicro SuperServer AS -3015MR-H5TNR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.