Supermicro SuperServer AS-3015MR-H10TNR Handleiding (94 Pagina's)

Handleiding

19

Chapter 2: Server Installation

3. In each rail set, the two sections are screwed together to keep them immobile during

shipping. Release these screws just enough to allow the rail sections to slide apart. Note

the arrow on the rail, which indicates the end that attaches to the front of the rack.

4. Slide the rails sections apart to match the depth of the rack. Position the rails with the

template and secure the front of each to the front of the rack with two athead screws,

then secure the back of each rail to the rear of the rack with two athead screws (see

Figure 2-3).

Stability hazard. The rack stabilizing mechanism must be in place, or the rack must

be bolted to the oor before you slide the unit out for servicing. Failure to stabilize the

rack can cause the rack to tip over.

Figure 2-3. Sliding the Rail to the Depth of the Rack

Bekijk gratis de handleiding van Supermicro SuperServer AS-3015MR-H10TNR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.