Supermicro SuperBlade SBI-420P-1T3N handleiding

94 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 94 van 94
94
SuperBlade Server SBI-420P-1(C2/T3)N User's Manual
Regulatory Compliance
FCC, ICES, CE, VCCI, RCM, NRTL, CB
Applied Directives, Standards
EMC/EMI: 2014/30/EU (EMC Directive)
FCC Part 15
ICES-003
VCCI 32-1
AS/NZS CISPR 32
EN55032
EN55035
CISPR 24
EN 61000-3-2
EN 61000-3-3
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-11
Green Environment:
2011/65/EU (RoHS Directive)
EC 1907/2006 (REACH)
2012/19/EU (WEEE Directive)
Product Safety: 2014/35/EU (LVD Directive)
UL/CSA 60950-1, 62368-1 (USA and Canada)
IEC/EN 60950-1, 62368-1
Perchlorate Warning
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products
containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate
General Data Center Environmental Specications
Particulate contamination specications
Air ltration: Data centers must be kept clean to Class 8 of ISO 14644-1 (ISO 2015). The air entering the data center
should be ltered with a MERV 11 lter or better. The air within the data center should be continuously ltered with a
MERV 8 lter or better.
Conductive dust: Air should be free fo conductive dust, zinc whiskers, or other conductive particles.
Corrrosive dust: Air should be free of corrosive dust.
Gaseous* contamination specications
Copper coupon corrosion rate: <300 Å/month per class G1 as dened by ANSI.ISA71.04-2013, reference by ASHRAE TC
9.9
Silver coupon corrosion rate: <200 Å/month per class G1 as dened by ANSI.ISA71.04-2013, reference by ASHRAE TC 9.9
*If testing with silver or copper coupons results in values less that 200 Å/month or 300 Å/month, respectively, then operating
up to 70% relative humidity (RH) is acceptable. If the testing shows corrosion levels exceed these limits, then catalyst-
type pollutants are probably present and RH should be driven to 50% or lower.

Bekijk gratis de handleiding van Supermicro SuperBlade SBI-420P-1T3N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkSupermicro
ModelSuperBlade SBI-420P-1T3N
CategorieNiet gecategoriseerd
TaalNederlands
Grootte15430 MB