Supermicro SuperBlade SBI-420P-1T3N Handleiding (94 Pagina's)

Handleiding

Appendix C CPU-Based RAID for NVMe

91

8. Press [F4] to save the conguration and reboot the system and press [DEL] to enter

BIOS.

Note: Disabling the VMD controller without rst deleting the associated existing RAID

volume can lead to unexpected behavior. This action is strongly not recommended.

Note: The e󰀨ects of physically changing or swapping a CPU on the VMD controller

enablement has not yet been thoroughly tested or documented.

9. Switch to Advanced > Intel(R) Virtual RAID on CPU > All Intel VMD Controllers >

Create RAID Volume.

10. Set Name.

11. Set RAID Level.

12. If cross-controller RAID is required, select Enable RAID spanned over VMD

Controller.

13. Select specic disks for RAID with an [X].

• RAID0: Select at least two [2 - 24] disks

• RAID1: Select only two disks

• RAID5: Select at least three [3 - 24] disks

• RAID10: Select only four disks

14. Select Strip Size (Default 64KB).

15. Select Create Volume.

16. If another RAID is needed, start again at step 9.

17. Press [F4] to save and reboot.

Figure C-7. Created Volume without

enabling RAID spanned over VMD

controller

Figure C-8. Created Volume with

enabling RAID spanned over VMD

controller

Bekijk gratis de handleiding van Supermicro SuperBlade SBI-420P-1T3N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.