Supermicro SuperBlade SBI-420P-1T3N Handleiding (94 Pagina's)

Handleiding

SuperBlade Server SBI-420P-1(C2/T3)N User's Manual

34

Hot-Swap for NVMe Drives

Supermicro servers support NVMe surprise hot-swap. For even better data security, NVMe

orderly hot-swap is recommended. NVMe drives can be ejected and replaced remotely using

IPMI.

Note: If you are using VROC, see the VROC appendix in this manual instead.

Ejecting a Drive

1. IPMI > Server Health > NVMe SSD

2. Select Device, Group and Slot, and click Eject. After ejecting, the drive Status LED

indicator turns green.

3. Remove the drive.

Note that Device and Group are categorized by the CPLD design architecture.

Slot is the slot number on which the NVMe drives are mounted.

Replacing the Drive

1. Remove the old drive and insert the replacement drive.

2. IPMI > Server Health > NVMe SSD

3. Select Device, Group and slot and click Insert. The drive Status LED indicator ashes

red, then turns o󰀨. The Activity LED turns blue.

Figure 2-6. IPMI Screenshot

Bekijk gratis de handleiding van Supermicro SuperBlade SBI-420P-1T3N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.