Supermicro SuperBlade SBA-4114S-T2N handleiding
Handleiding
Je bekijkt pagina 28 van 100
28
Chapter 2: Installation and Setup
11. Lower the heatsink down till it rests securely on CPU Package over the four screw
holes on the socket frame.
12. Using a Torx T20 driver in a diagonal pattern as below, tighten the four heatsink
screws halfway and then tighten them evenly to 16.1 kgf-cm (14.0 lbf-in) of torque.
The processor and heatsink installation is complete. Repeat this procedure for any remaining
CPU sockets on the motherboard.
#1 Screw
#2 Screw
#3 Screw
#4 Screw
Figure 2-12. Securing the Heatsink
Figure 2-11. Mounting the Heatsink
Bekijk gratis de handleiding van Supermicro SuperBlade SBA-4114S-T2N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | SuperBlade SBA-4114S-T2N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17306 MB |
