Supermicro MicroBlade MBI-311C-1T2N handleiding

Niet gecategoriseerd

Supermicro

98 pagina's

PDF beschikbaar

Handleiding

Chapter 2: Installation and Setup

2.3PoweringOnorO󰀨

Each blade unit may be powered on and o󰀨 independently from the rest of the blades in the

enclosure.

A blade unit may be powered on or o󰀨 in any of the following ways:

• Press the power button on the blade unit.

• Use IPMIView or the browser based management utility to power down; requires Operator

or Admin privileges on the CMM.

• Use SMCIPMItool when connected to the CMM to power down; requires Operator or Admin

privileges on the CMM.

• Use IPMIview or a browser connected to the onboard BMC chip to power down.

• Use SMCIPMItool to use a Command Line Interface to the onboard BMC chip; requires

Operator or Admin privileges.

2.4 Processor and Heatsink Installation

Notes:

• Use ESD protection.

• Unplug the AC power cord from all power supplies.

• Check that the plastic protective cover is on the CPU socket and that none of the socket

pins are bent. If they are, contact your retailer.

• When handling the processor, avoid touching or placing direct pressure on the land grid

array (gold contacts).

• Do not rub the CPU against any surface or against the pins of the socket. This may cause

irreparable damage to the CPU or the socket.

• Improper installation or socket misalignment can cause serious damage to the processor

or the socket and may require manufacturer repairs.

• Thermal grease is pre-applied on new heatsinks. No additional thermal grease is needed.

• Refer to the system web page for updates on processor support.

• Graphics in this manual are for illustration purposes only. Your components may look dif-

ferent.

Bekijk gratis de handleiding van Supermicro MicroBlade MBI-311C-1T2N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.