Supermicro MicroBlade MBI-311C-1C2 Handleiding (98 Pagina's)

Handleiding

27

Chapter 2: Installation and Setup

Installing Memory

ESD Precautions

Electrostatic Discharge (ESD) can damage electronic com ponents including memory modules.

To avoid damaging DIMM modules, it is important to handle them carefully. The following

measures are generally su󰀩cient.

• Use a grounded wrist strap designed to prevent static discharge.

• Handle the memory module by its edges only.

• Put the memory modules into the antistatic bags when not in use.

Installing Memory

Follow the memory population guidelines in the table above.

1. Push the release tabs outwards on both ends of the DIMM slot to unlock it.

Notches

Release Tabs

2. Align the key of the DIMM with the receptive point on the memory slot and with your

thumbs on both ends of the module, press it straight down into the slot until the module

snaps into place.

3. Ensure the release tabs are in the locked position to secure the DIMM module into the

slot.

Caution: Exercise caution when installing or removing memory modules to prevent damage

to the DIMMs or slots.

Removing Memory

To remove a DIMM, unlock the release tabs then pull the DIMM from the memory slot.

Key

Bekijk gratis de handleiding van Supermicro MicroBlade MBI-311C-1C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.