Supermicro MicroBlade MBI-311C-1C2 Handleiding (98 Pagina's)

Handleiding

23

Chapter 2: Installation and Setup

Installing the CPU Heatsink

Do not apply thermal grease to the heatsink or the CPU—the required amount has already

been applied.

1. Place the heatsink on top of the CPU so that the four mounting holes are aligned with

those on the motherboard and the heatsink bracket underneath.

2. With a Phillips torque driver, gradually tighten screws #1, #2, then #3, #4 as marked

below to ensure even pressure. To avoid damaging the processor or socket, do not use

a force greater than 12 lbf-in when tightening the screws.

3. Examine all corners to ensure the heatsink is rmly attached to the motherboard.

Screw #3

Screw #2

Screw #1

Screw #4

OPEN 1st

Direction of the

airow

Bekijk gratis de handleiding van Supermicro MicroBlade MBI-311C-1C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.