Supermicro MicroBlade MBI-311C-1C2 Handleiding (98 Pagina's)

Handleiding

18

Chapter 2: Installation and Setup

Removing a Blade Unit from the Enclosure

A blade can be removed from the enclosure while other blades continue to operate.

Note: When a blade is removed, please ensure the slot is lled with a dummy blade to ensure

the neighboring blades do not overheat.

Removing a Blade Unit from the Enclosure

1. Power down the blade unit.

2. Push and hold the locking lever out.

3. Use the locking lever to pull the blade from the enclosure.

Figure 2-1. Blade Locking Lever

2.2 Installing or Removing the Blade Unit

Installing a Blade Unit into the Enclosure

1. Pull the locking lever out, and push the blade into its bay. Caution: Insert the blade

carefully so the rear connectors are not damaged.

2. As the blade is seated in the enclosure, push the lever into its locked position.

Locking Lever

Bekijk gratis de handleiding van Supermicro MicroBlade MBI-311C-1C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.