Supermicro MicroBlade MBI-310T-4C2 Handleiding (88 Pagina's)

Handleiding

22

Chapter 2: Installation and Setup

Installing the CPU Heatsink

1. Do not apply thermal grease to the heatsink or the CPU; the required amount has

already been applied.

2. Align the four holes of the heatsink with the four mounting holes on the motherboard.

3. With a Phillips screwdriver, gradually tighten screws #1, #2, then #3, #4 to ensure even

pressure. The order of the screws is shown below. To avoid damaging the processor or

socket, do not use a force greater than 12 lbf-in when tightening the screw.

4. Examine all corners to ensure the heatsink is rmly attached to the motherboard.

Mounting Holes

Screw#1

Heatsink Bracket

Motherboard

Screw#2

Screw#3

Screw#4

Bekijk gratis de handleiding van Supermicro MicroBlade MBI-310T-4C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.