Supermicro H14SST-GE handleiding
Handleiding
Je bekijkt pagina 22 van 103
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure that
the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are highly
recommended because they ground the motherboard to the chassis. Make sure that the metal
standoffs click in or are screwed in tightly.
Figure 2-1. Torque Driver (1), Philips Screws (6), and Standoffs (6, only if Needed)
Notes:
l
To avoid damaging the motherboard and its components, do not use a force greater
than 8 lbf-in on each mounting screw during motherboard installation.
l
Some components are very close to the mounting holes. Take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Installing the Motherboard
1. Install the I/O shield into the back of the chassis, if applicable.
Figure 2-2. Installing the I/O Shield
Note: Images displayed are for illustration purposes only. The components installed in
your system may or may not look exactly the same as the graphics shown in the
manual.
22
H14SST-GE: Component Installation
Bekijk gratis de handleiding van Supermicro H14SST-GE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | H14SST-GE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13111 MB |
