Supermicro H14SSL-NT handleiding
Handleiding
Je bekijkt pagina 21 van 119
1.4 System Health Monitoring
Onboard Voltage Monitors
An onboard voltage monitor will continuously scan the voltages of the onboard chipset,
memory, processor, and battery. Once a voltage becomes unstable, a warning is given or an
error message is sent to the screen. You can adjust the voltage thresholds to define the
sensitivity of the voltage monitor. Real time voltage levels are displayed in IPMI.
Fan Status Monitor with Firmware Control
The system health monitor embedded in the BMC chip can check the RPM status of the cooling
fans. The processor and chassis fans are controlled via lPMI.
Environmental Temperature Control
System Health sensors in the BMC monitor the temperatures and voltage settings of onboard
processors and the system in real time via the IPMI interface. Whenever the temperature of the
processor or the system exceeds a user-defined threshold, system/processor cooling fans will
be turned on to prevent the processor or the system from overheating.
Note: To avoid possible system overheating, be sure to provide adequate airflow to your
system.
21
H14SSL-N/NT: Introduction
Bekijk gratis de handleiding van Supermicro H14SSL-NT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | H14SSL-NT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19295 MB |
