Supermicro H14DSG-OD handleiding
Handleiding
Je bekijkt pagina 34 van 113
Figure 2-9. Heatsink Placement
2. Using a T20 torque driver, tighten the screws using the diagonal tightening pattern and
torque specifications printed on the heatsink. Tighten the two center screws completely
before tightening the four corner screws.
The heatsink is now secured.
Uninstalling the Heatsink and Processor
1. Remove the screws holding the heatsink and gently work it loose.
2. Clean the thermal grease left by the heatsink on the processor assembly to limit the risk
of it contaminating the land pads or contacts in the socket housing.
3. Unscrew the plate and lift the force frame to the vertical position.
4. Lift the rail frame using the lift tabs near the front end of the rail frame. Note that the rail
frame is spring loaded, so be careful lifting it up into a vertical position.
5. Grip the handle of the carrier frame and pull upwards to extract it from the rail frame.
Return the processor assembly to its original shipping container.
6. Grip the handle on the external cap and return it to the rail frame sliding it downwards till
it rests in the frame.
34
H14DSG-OD: Component Installation
Bekijk gratis de handleiding van Supermicro H14DSG-OD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | H14DSG-OD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16495 MB |
