Supermicro CSE-PTJBOD-CB3 handleiding
Handleiding
Je bekijkt pagina 10 van 26
2-2
CSE-PTJBOD-CB3 Power Board User's Guide
2-2 ComponentandConnectorDenitions
2. SAS2/SAS3 I
2
C Connectors
These connectors are designated JP1-JP4
and allow the power board to be connected
to up to four SAS2/SAS3 backplanes.
1. BMC Chip
The Baseboard Management Controller
(BMC) chip monitors the physical state of
a system and provides communication with
the system administrator through an inde-
pendent connection.
4. Manufacturer's USB Test Connector
This connector is designated FB1 and is for
Supermicro manufacturing use only.
3. Manufacturing Test Connector
This connector is designated J3 and is for
Supermicro manufacturing use only.
5. IPMI LAN LED Header
This connector is designated JP6 and is
used to connect to the LED indicators on
the chassis using cable CBL-NTWK-0584
or CBL-NTWK-0587.
Bekijk gratis de handleiding van Supermicro CSE-PTJBOD-CB3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | CSE-PTJBOD-CB3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2217 MB |
