Supermicro CSE-M35TQB handleiding

29 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 12 van 29
3-3
Safety Information and Technical Speci cations
9. Activity LED Header
The activity LED header, designated JP26,
is used to indicate the activity status of
each SAS drive. For the activity LED
header to work properly, connect a 10-pin
LED cable.
6. and 7. Sideband Headers
The sideband headers are designated JP51
and JP52. For SES-2 to work properly, an
8-pin sideband cable must be connected.
See the table to the right for pin de ni-
tions.
Sideband Headers
Pin # De nition Pin # De nition
2 Mobile rack
Addressing
(SB5)
1 Controller
ID (SB6)
4 Reset (SB4) 3 GND (SB2)
6 GND (SB3) 5 SDA (SB1)
8 Mobile rack
ID (SB7)
7 SCL (SB0)
10 No Connec-
tion
9 No Connec-
tion
SAS Activity LED Header
Pin De nitions
Pin # De nition Pin # De nition
1 ACT IN#0 6 ACT IN#4
2 ACT IN#1 7 ACT IN#5
3 ACT IN#2 8 ACT IN#6
4 ACT IN#3 9 ACT IN#7
5 Ground 10 Empty
10. Fan Connector
The 3-pin connectors, designated JP22,
provides power to the mobile rack fan. See
the table on the right for pin de nitions.
Fan Connectors
Pin# De nition
1 Ground
2 +12V
3 Tachometer
8. Upgrade Connector
The upgrade connector, designated JP46,
is used for diagnostic purposes only. This
connector should only be used by a certi ed
and experienced technician.
11 - 15. SAS/SATA Ports
The SAS/SATA ports are used to connect
the SAS/SATA cables from the ports to the
hard drives. The ve ports are designated
#0 - #4.

Bekijk gratis de handleiding van Supermicro CSE-M35TQB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkSupermicro
ModelCSE-M35TQB
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2242 MB

Caratteristiche Prodotto

Kleur van het productZwart
Gewicht3700 g
Afmetingen (B x D x H)146 x 244 x 129 mm
Interne schijfposities5x 3.5", 3x 5.25"
Code geharmoniseerd systeem (HS)85381000