Supermicro CARAM5-M handleiding
Handleiding
Je bekijkt pagina 74 van 97
IPv4 PXE Support
This setting enables IPv4 PXE boot support. The options are Disabled and Enabled.
IPv4 HTTP Support
This setting enables IPv4 HTTP boot support. The options are Disabled and Enabled.
IPv6 PXE Support
This setting enables IPv6 PXE boot support. The options are Disabled and Enabled.
IPv6 HTTP Support
This setting enables IPv6 HTTP boot support. The options are Disabled and Enabled.
PXE Boot Wait Time
This sets the wait time, in seconds, to press the ESC key to abort the PXE boot. Use either =/-
or numeric keys to set the value. The default value is 0.
Media Detect Count
This sets the number of times the presence of media will be checked. Use either +/- or numeric
keys to set the value. The default value is 1.
►IPv4 Network Configuration
Configured
This setting enables or disables network address configuration. The options are Disabled and
Enabled.
Save Changes and Exit
The options are Yes and no.
►IPv6 Network Configuration
Set IPv6 Network parameters.
►Enter Configuration Menu
Interface Name
Interface Type
MAC address
Host addresses
Route Table
Gateway addresses
74
CARAM5-M: UEFI BIOS
Bekijk gratis de handleiding van Supermicro CARAM5-M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | CARAM5-M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14422 MB |
