Supermicro CARAM5-M handleiding
Handleiding
Je bekijkt pagina 71 van 97
Serial Port Console Redirection
COM1
Console Redirection
Select Enabled to enable COM port 1 for Console Redirection, which allows a client machine to
be connected to a host machine at a remote site for networking. The options are Disabled and
Enabled.
Note: This feature will be set to Enabled if there is no BMC support.
►Legacy Console Redirection Settings
Legacy Serial Redirection Port
Select a COM port to display redirection of legacy OS and legacy OPROM messages. The
options are COM1 and SOL/COM2 (Disabled).
Resolution
On legacy OS, the number of rows and columns supported redirection. The options are 80x24
and 80x25.
Redirection After BIOS Post
When bootloader is selected, then legacy console redirection is disabled before booting to
legacy OS. When always is select, then legacy console redirection is enabled for legacy OS.
The options are Always Enable and BootLoader.
Console Redirection EMS
Select Enabled to use the SOL port for Console Redirection. The options are Disabled and
Enabled.
SATA Configuration
SATA Configuration
SATA Mode
The options are AHCI Mode and RAID Mode.
PCIe/PCI/PnP Configuration
Above 4G Decoding
This setting enables 64-bit PCI device access to memory beyond 4 GB for improved memory
utilization and performance. The options are Disabled and Enabled.
71
CARAM5-M: UEFI BIOS
Bekijk gratis de handleiding van Supermicro CARAM5-M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | CARAM5-M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14422 MB |
