Supermicro CARAM5-M handleiding
Handleiding
Je bekijkt pagina 66 van 97
Option ROM Messages
Use this feature to set the display mode for the Option ROM. Select Keep Current to display the
current AddOn ROM display settings. Select Force BIOS to use the Option ROM display mode
set by the system BIOS. The options are Force BIOS and Keep Current.
Bootup NumLock State
Use this feature to set the Power-on state for the <Numlock> key. The options are On and Off.
Wait For "F1" If Error
Select Enabled to force the system to wait until the <F1> key is pressed if an error occurs. The
options are Disabled and Enabled.
INT19 Trap Response
Interrupt 19 is the software interrupt that handles the boot disk function. When this feature is set
to Immediate, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at bootup
immediately and allow the drives that are attached to these host adaptors to function as
bootable drives. If this feature is set to Postponed, the ROM BIOS of the host adaptors will not
capture Interrupt 19 immediately to allow the drives attached to these adaptors to function as
bootable devices at bootup. The options are Immediate and Postponed.
Re-try Boot
If this feature is set to Enabled, the system BIOS will automatically reboot the system from an
Extensible Firmware Interface (EFI) boot device after an initial boot failure. The options are
Disabled and EFI Boot.
Power Configuration
Watch Dog Function
Select Enabled to allow the Watch Dog timer to reboot the system when it is inactive for more
than five minutes. The options are Disabled and Enabled.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Stay Off for the system
power to remain off after a power loss. Select Power On for the system power to be turned on
after a power loss. Select Last State to allow the system to resume its last power state before a
power loss. The options are Stay Off, Power On, and Last State.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select 4
Seconds Override to power off the system after pressing and holding the power button for four
seconds or longer. Select Instant Off to instantly power off the system as soon as you press the
power button. The options are Instant Off and 4 Seconds Override.
66
CARAM5-M: UEFI BIOS
Bekijk gratis de handleiding van Supermicro CARAM5-M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | CARAM5-M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14422 MB |
