Supermicro CARAM5-M handleiding
Handleiding
Je bekijkt pagina 20 van 97
1.5 System Health Monitoring
Onboard Voltage Monitors
An onboard voltage monitor will continuously scan the voltages of the onboard chipset,
memory, processor, and battery. Once a voltage becomes unstable, a warning is given, or an
error message is sent to the screen. You can adjust the voltage thresholds to define the
sensitivity of the voltage monitor.
Fan Status Monitor with Firmware Control
PC health monitoring in the BIOS can check the RPM status of the cooling fans. The onboard
CPU and chassis fans are controlled by Thermal Management via Embedded Controller (EC).
Environmental Temperature Control
The thermal control sensor monitors the CPU temperature in real time and increases the
thermal control fan speed whenever the CPU temperature exceeds a user-defined threshold.
The overheat circuitry runs independently from the CPU. When the thermal sensor detects that
the CPU temperature is too high, it will automatically increase the thermal control fan speed to
prevent the CPU from overheating. Conversely, when the temperature decreases, the fan
speed will be reduced. The onboard chassis thermal circuitry can monitor the overall system
temperature and alert the user when the chassis temperature is too high.
Note: To avoid possible system overheating, be sure to provide adequate airflow to your
system.
20
CARAM5-M: Introduction
Bekijk gratis de handleiding van Supermicro CARAM5-M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | CARAM5-M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14422 MB |
