Supermicro A2SAN-L handleiding
Handleiding
Je bekijkt pagina 92 van 103
A2SAN-H/-E/-L and X11SAN User's Manual
92
Appendix A
BIOS Codes
A.1 BIOS Error POST (Beep) Codes
During the POST (Power-On Self-Test) routines, which are performed each time the system
is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the boot-up
process. The error messages normally appear on the screen.
Fatal errors are those which will not allow the system to continue the boot-up procedure. If
a fatal error occurs, you should consult with your system manufacturer for possible repairs.
These fatal errors are usually communicated through a series of audible beeps. The table
below lists some common errors and their corresponding beep codes encountered by users.
BIOS Beep (POST) Codes
Beep Code Error Message Description
1 beep Refresh Circuits have been reset (Ready to power up)
5 short, 1 long Memory error No memory detected in system
5 long, 2 short Display memory read/write error Video adapter missing or with faulty memory
1 long continuous System OH System overheat condition
Bekijk gratis de handleiding van Supermicro A2SAN-L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | A2SAN-L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13897 MB |
Caratteristiche Prodotto
| Breedte | 146 mm |
| Diepte | 101.6 mm |
| Aantal processorkernen | 2 |
| Type stroombron | ATX |
| Aantal USB 2.0-poorten | 4 |
