Handleiding
Je bekijkt pagina 58 van 68
58
the hinge position.
- Remove the three screws from the right top hinge and take off the hinge, insert the
plastic part, rivet the three screws thereafter.
- Take off the lower hinge and fix it to the opposite side.
- Take the door. Insert the lower hinge axle into the right bottom hole of the door.
- Fix the spare hinge to the left top position of the cabinet. Adjust the door, make it
straight and in alignment with the cabinet.
Note: As the door gasket gets pressed-in during shipment, after reversing the door the
gasket might have to be reset. This will be good for seal to avoid any air escaping. If there is
a gap between the cabinet and the door gasket, set the gasket by gently pulling it out to seal
the gap. If necessary, you are recommended also to use the hair drier to warm the gasket to
get rid of the gap.
ENG
Bekijk gratis de handleiding van Sunwind Ventus 225, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sunwind |
| Model | Ventus 225 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4971 MB |