Handleiding
Je bekijkt pagina 54 van 68
54
Part for top control
A B C D
INSTALLATION INSTRUCTIONS
It is advisable to clean the inside of the absorption refrigerator with lukewarm water using a
mild detergent, and then to dry it thoroughly prior to use.
LEVELLING AND VENTILATION
The refrigeration system of the cabinet is designed to operate with the cabinet located on a
flat surface. Avoid tilting the cabinet side.
If the cabinet must be tilted on an angle for handling or moving purposes, allow it to sit in an
upright position 20 to 30 minutes prior to plugging it in and starting the cooling of the
storage compartment.
Please observe the following recommended.
To ensure the circulation, the unit should be kept at 2.5 cm, away from the rear wall and
possible side walls. The clearance above the refrigerator should be at least
100 mm.
Locate the unit away from direct sunlight. This will enable you to obtain the best
A: Pulse ignition switch
B: Flame indicator
C: Safety valve
D: Thermostat knob
ENG
Bekijk gratis de handleiding van Sunwind Ventus 225, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sunwind |
| Model | Ventus 225 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4971 MB |