Sungrow SG6.0RS-L handleiding
Handleiding
Je bekijkt pagina 31 van 98
21
4
Mechanical Mounting
Respect all local standards and requirements during mechanical installation.
4.1 Safety During Mounting
Make sure there is no electrical connection before installation.
Before drilling, avoid the water and electricity wiring in the wall.
For specific requirements for the installation environment, see ""4.2.1 Installation
Environment Requirements"". In case the environment where the product is in-
stalled does not meet the requirements, SUNGROW shall not be held liable for any
property damage arising therefrom.
Improper handling may cause personal injury!
• When moving the product, be aware of its weight and keep the balance to pre-
vent it from tilting or falling.
• Wear proper protective equipment before performing operations on the product.
• The bottom terminals and interfaces of the product cannot directly contact the
ground or other supports. The product cannot be directly placed on the ground.
During installation, ensure that no device in the system causes it hard for the DC
switch and the AC circuit breaker to act or hinders maintenance personnel from
operating.
If drilling is required during installation:
• Wear goggles and protective gloves when drilling holes.
• Make sure to avoid the water and electricity wiring in the wall before drilling.
• Protect the product from shavings and dust.
Bekijk gratis de handleiding van Sungrow SG6.0RS-L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sungrow |
| Model | SG6.0RS-L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9136 MB |
