Sungrow SG250HX-20 handleiding
Handleiding
Je bekijkt pagina 28 van 154
4 Mechanical Mounting
WARNING
Respect all local standards and requirements during mechanical installation.
4.1 Safety During Mounting
DANGER
Make sure there is no electrical connection before installation.
Before drilling, avoid the water and electricity wiring in the wall.
WARNING
For specific requirements for the installation environment, see 4.2.1 Installation Envi
ronment Requirements. In case the environment where the product is installed does
not meet the requirements, SUNGROW shall not be held liable for any property dam
age arising therefrom.
CAUTION
Improper handling may cause personal injury!
• When moving the product, be aware of its weight and keep the balance to prevent
it from tilting or falling.
• Wear proper protective equipment before performing operations on the product.
• The bottom terminals and interfaces of the product cannot directly contact the
ground or other supports. The product cannot be directly placed on the ground.
NOTICE
• During installation, ensure that no device in the system causes it hard for the DC
switch and the AC circuit breaker to act or hinders maintenance personnel from
operating.
•
• If drilling is required during installation:
- Wear goggles and protective gloves when drilling holes.
- Make sure to avoid the water and electricity wiring in the wall before drilling.
- Protect the product from shavings and dust.
19
Bekijk gratis de handleiding van Sungrow SG250HX-20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sungrow |
| Model | SG250HX-20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15373 MB |
