Sungrow SG250HX-20 handleiding
Handleiding
Je bekijkt pagina 14 van 154
User Manual 1 Safety Instructions
WARNING
• Check the positive and negative polarity of the PV strings, and connect the PV
connectors to corresponding terminals only after ensuring polarity correctness.
• During the installation and operation of the inverter, please ensure that the positive
or negative poles of PV strings do not short-circuit to the ground. Otherwise, an
AC or DC short-circuit may occur, resulting in equipment damage. The damage
caused by this is not covered by the warranty.
• Do not connect any load between the inverter and the AC circuit breaker directly
connected to it, so as to prevent the switch from tripping by mistake.
• Determine the specifications of AC circuit breakers strictly in compliance with the
applicable local laws and regulations and safety standards or the recommendation
by SUNGROW. Otherwise, the switch may not open in time in the event of some
thing abnormal, which may then lead to safety incidents.
NOTICE
Comply with the safety instructions related to PV strings and the regulations related
to the local grid.
1.4 Operation Safety
DANGER
When routing cables, ensure a distance of at least 30 mm between the cables and
heat-generating components or areas to protect the insulation layer of cables from
aging and damage.
5
Bekijk gratis de handleiding van Sungrow SG250HX-20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sungrow |
| Model | SG250HX-20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15373 MB |
