Sungrow SG200HX-US handleiding
Handleiding
Je bekijkt pagina 32 van 129
User Manual 4 Mechanical Mounting
• Do not install the inverter in an environment with vibration and strong electromagnetic field.
Strong-magnetic-field environments refer to places where magnetic field strength mea
sures over 30 A/m.
• In dusty environments such as places full of dust, smoke, or floc, particles may cling to
the device’s air outlet or heat sink, thus impacting its heat dissipation performance or even
getting it damaged. Therefore, do not install the inverter in dusty environments. If the in
verter has to be installed in such environments, please clean its fans and heat sink on a
regular basis to ensure a good heat dissipation performance.
• The average temperature approximately 1 m around the inverter should be taken as its op
erating temperature. The temperature and humidity should meet the requirements below:
4.2.2 Carrier Requirements
The mounting structure where the inverter is installed must comply with local/national stan
dards and guidelines. Ensure that the installation surface is solid enough to bear four times
the weight of the inverter and is suitable for the dimensions of the inverter (e.g. cement walls,
plasterboard walls, etc.).
Do not install the inverter on a carrier that may vibrate in resonance, so as to avoid making
bigger noise.
The structure should meet the following requirements:
4.2.3 Angle Requirements
Install the inverter vertically or tilt backwards. Do not install the inverter horizontally, forward,
excessively backward, sideways, or upside down.
23
Bekijk gratis de handleiding van Sungrow SG200HX-US, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sungrow |
| Model | SG200HX-US |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11778 MB |
