Sungrow MVS9000-LV handleiding
Handleiding
Je bekijkt pagina 75 van 88
• Ambient temperature: 5℃–40℃
• Base material temperature: 5℃–60℃
• Relative humidity: 10%–85%RH
Repair Steps
Step 1 Polish the paint surface with blistering or scratches with an abrasive paper to expose the
gray primer. Use a film thickness meter to measure the primer thickness, which must be at
least 150μm.
Step 2 Use a clean brush to remove any residue from the surface.
Step 3 Use a piece of clean cloth dipped in alcohol or detergent to remove the surface powder.
Step 4 Repair the finish paint.
a. Prepare the finish paint with the same color as the appearance.
Common finish paint colors
RAL7035 (Streamer
Grey)
RAL9003 (White)
RAL7016 (Dolphin
Grey)
b. Mix the finish paint according to the paint model and the requirements of Table 9-7
Finish Paint Selection and Mixing.
c. Apply the finish paint using a brush in a crosshatch pattern. Once the paint fully dried,
measure the film thickness using a film thickness meter. Ensure that the single coat
thickness falls between 50μm–100μm.
System Manual 9 Routine Maintenance
73
Bekijk gratis de handleiding van Sungrow MVS9000-LV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sungrow |
| Model | MVS9000-LV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8876 MB |
