Sungrow MVS9000-LV handleiding
Handleiding
Je bekijkt pagina 72 van 88
9.3.2 Checking and Cleaning Air inlets of the Heat Exchanger
Step 1 Loosen the air inlet screws of the heat exchanger and remove the air inlet grid cover.
Step 2
Take out the filter cotton and clean it.
Step 3 Reinstall the filter.
Step 4 Restore the grid cover of the air inlet.
--End
9.4 Cleaning the Floor Drain
Step 1 Remove the two M6 fixing bolts on the floor drain.
Step 2 Take out the floor drain. Then, open its cover, and clean the dirt and debris inside.
Step 3 Close the cover, put the floor drain back, and tighten the fixing bolts.
--End
9.5 Appearance Repair
Check if the protective paint sprayed on the enclosure of the product fell off or
peeled off. If so, repair it timely.
Spray a special protective paint to the exterior of the product every 5 years.
Solutions
Select different repair solutions based on the damage conditions.
System Manual9 Routine Maintenance
70
Bekijk gratis de handleiding van Sungrow MVS9000-LV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sungrow |
| Model | MVS9000-LV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8876 MB |
