Sungrow MVS9000-LV handleiding
Handleiding
Je bekijkt pagina 58 van 88
Step 1 Remove the sealing cap and insulating stopper from the front connector, and unscrew the
connecting bolt assembly inside.
Step 2 Fit the connecting rod and then the stud bolt to the front connector.
Step 3 Attach the rear connector with surge arrester to the front connector.
Step 4 Fit the internal connecting bolt assembly, sealing cap, and insulating stopper.
Step 5 Attach the surge arrester's PE wire and copper braid to the grounding wire of the main
cable.
--End
NOTICE
If the voltage rating exceeds 36kV, a support plate must be installed under the surge
arrester.
7.1.5 Removing Foam Part from Oil Thermometer
Remove the protective cover on the oil thermometer and remove the foam parts in the
protective cover before the MV Grid-Connected PV Inverter is officially put into operation.
After removal, re-install the protective cover.
7.1.6 Oil Drain
Prerequisite
Location
The oil drain valve is located at the bottom of transformer, the size of the oil drain valve
varies by the transformer manufacturers.
System Manual7 Powering up and Powering down
56
Bekijk gratis de handleiding van Sungrow MVS9000-LV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sungrow |
| Model | MVS9000-LV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8876 MB |
