Handleiding
Je bekijkt pagina 5 van 20
3
Important: Always ensure your blender is
unplugged from the power outlet before
fitting or removing the blade assembly.
Always handle the blade assembly with
caution, as the blades are extremely sharp.
Wash and Dry Parts
Note: Before using your Ice Breaker
Blender, we recommend removing the
six-blade system for thorough cleaning.
Remove carefully the Blade system from
the glass jug by turning it clockwise.
Remove the ingredient cup from the lid.
Wash the blade assembly, ingredient cup,
lid and glass jug in warm soapy water.
Rinse and allow thorough air drying.
Re-assemble the six-blade system in the
glass jug
Place carefully the blade assembly in the
glass jug. Ensure that the blade assembly
is firmly in place by turning it anti-
clockwise.
Do not remove the stainless steel blades
from the blade assembly.
The blender jug will leak if the six-blade
system is not assembled correctly.
Before Using Your Ice Breaker Blender
Note: When removing the blade assembly
from the jug you may need to slightly tilt
the blade so that it slides out easily.
1. Place the blender jug onto the motor
base.
2. Place ingredients into the glass jug. Do
not exceed the maximum indicated level –
1.25L.
3. Position the lid with ingredient cup onto
the blender jug. Ensure the lid is firmly in
place.
4. Using the selector dial, select the desired
blending speed 1, 2 or PULSE. Speeds
1-2 will provide continuous blending until
the dial is turned to the ‘off’ position.
The Blending Guide on page 4 shows the
functions that can be performed and the
suggested speeds to use.
5. After you have completed blending, turn
the control dial to the ‘off’ position.
Using Your Ice Breaker Blender
Note: Do not operate for more than 2
minutes at a time. Further ingredients
can also be added whilst blending by
removing the ingredient cup and pouring
ingredients through the hole in the lid.
Note: Although the lid fits firmly to the
glass jug, we advise when blending
liquid ingredients, to place your hand
on the lid as you initially select the
blending speed/function. As the 550 watt
motor could cause the liquid to surge up
causing leakage. Once you have started
blending you can remove your hand.
Note:
Do not switch ‘ON’ the Ice Breaker
Blender without the lid in position.
Bekijk gratis de handleiding van Sunbeam Ice Breaker PBT2000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sunbeam |
| Model | Ice Breaker PBT2000 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 1664 MB |