Sun Joe 24V-HCS-4-LTE handleiding
Handleiding
Je bekijkt pagina 4 van 24
4
• Persons with limited physical, sensorial or mental abilities
are not allowed to use the pruning saw, unless they are
supervised for their safety by a qualified person or are
briefed by the responsible person on how to use the
machine.
• Children and adolescents are not allowed to use the pruning
saw. Excluded from this prohibition are young people over
16 years of age under the supervision of an expert for the
purpose of training.
• Please note the warning symbols. They mark all those
instructions that are important for safety reasons. Observe
these instructions as failure to do so could result in serious
injury!
• The pruning saw must be used only by one person at a
time. Make sure bystanders do not stay in the vicinity of the
pruning saw’s work area.
• Check the safe operating condition of the pruning saw, in
particular the guide bar and the saw chain, before each
operation.
• Always have a safe stand when working with the saw.
• Hold the machine firmly and securely when switching on.
• Make sure the guide bar and the saw chain are free when
switched on and don't come into contact with the workpiece
to be cut.
• Keep your hands away from the sawing area. Do not reach
under the workpiece. Contact with the saw chain may result
in injury.
• Guide the pruning saw onto the workpiece only when
switched on. Otherwise there is a risk of kick-back if the saw
chain gets caught in the workpiece.
• When sawing, the base plate must always face against the
workpiece. The saw chain can become jammed and lead to
loss of control over the machine.
• When the cut is completed, switch off the machine and then
pull the saw chain out of the cut only after it has come to a
standstill. This way you can avoid kick-back.
• Clamp the material to be processed well. Do not support the
workpiece with your hand or foot. Do not touch objects or
the floor with the saw running. Danger of kick-back.
• When sawing converted timber and thin branches, always
use a strong support, such as a sawing trestle. Do not stack
timber pieces.
• Before cutting logs, secure the logs in position.
• When working on sloping ground, make sure to work facing
upwards.
• Be particularly careful when cutting splintered wood.
Splinters of wood can be torn along by the saw chain and
increase the risk of injury!
• Foreign objects such as nails, screws, metal parts, sand, etc.
lead to increased wear on the guide bar and saw chain.
• A blunt saw chain can cause overheating and damage
to the motor.
• Always remove the battery when checking the chain tension,
to re-tighten it, to mount the saw chain and to eliminate
faults! Also remove the battery if you do not use the machine
temporarily.
Battery & Charger
Safety Instructions
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have
a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to be able to assemble the
best possible battery packs.
Despite all the safety precautions, caution must always be
exercised when handling batteries. The following points must
be obeyed at all times to ensure safe use. Safe use can only be
guaranteed if undamaged cells are used. Incorrect handling of
the battery pack can cause cell damage.
IMPORTANT! Analyses confirm that incorrect use and poor care
of high-performance batteries are the main factors responsible
for personal and/or product damage.
mWARNING! Use only approved replacement batteries;
other batteries may damage the cordless pruning saw and
cause it to malfunction, which can lead to serious personal
injury.
mWARNING! Do not use a battery pack or appliance that
is damaged or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire, explosion or risk
of injury.
Do not modify or attempt to repair the appliance or the battery
pack except as indicated in the instructions for use and care.
Have your battery pack serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the battery pack is maintained.
mCAUTION! To reduce the risk of injury, charge the 24V*
IONMAX lithium-ion battery pack only in its designated 24V*
IONMAX lithium-ion charger. Other types of chargers present
risk of fire, personal injury and damage. Do not wire a battery
pack to a power supply plug or car cigarette lighter. Such
misuse will permanently disable or damage the battery pack.
• Avoid dangerous environments – Do not charge the battery
pack in rain, snow or in damp or wet locations. Do not use
the battery pack or charger in the presence of explosive
atmospheres (gaseous fumes, dust or flammable materials)
because sparks may be generated when inserting or
removing the battery pack, which could lead to a fire.
• Charge in a well-ventilated area – Do not block the charger
vents. Keep them clear to allow for proper ventilation. Do not
allow smoking or open flames near a charging battery pack.
Vented gases may explode.
Bekijk gratis de handleiding van Sun Joe 24V-HCS-4-LTE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sun Joe |
| Model | 24V-HCS-4-LTE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3029 MB |
