Summit SLS24W3P handleiding
Handleiding
Je bekijkt pagina 8 van 28
8
Attaching the Drain Hose
This dryer needs to be connected to a drain to dispel the water collected during the drying cycle.
A drain hose is supplied with the appliance, and simply needs to be attached to an outer drain
before use. To attach the drain hose:
1.
Remove the drain hose
from the holder on the
back wall of the dryer,
located on the left hand
side, below the top cover.
2.
Attach the hose into a
drain no more than 31”
(80cm) from the floor.
Connecting the Appliance to the Power Supply
Before connecting the dryer to the power supply, wait for a least two hours for the appliance
to reach room temperature.
Connect the dryer to a grounded power outlet, which should be freely accessible after
installation.
DO NOT connect the dryer using an extension cord.
A damaged power cord may only be replaced by an authorized repair person.
NOTE: Use over-voltage protection to protect the appliance in case of a lightning strike.
Bekijk gratis de handleiding van Summit SLS24W3P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Summit |
| Model | SLS24W3P |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4118 MB |
