Summit SLS24W3P handleiding
Handleiding
Je bekijkt pagina 6 van 28
6
INSTALLATION AND CONNECTION
CAUTION: Installation of this dryer should be performed by a qualified installation specialist.
1.
Before using your dryer, remove the exterior and interior packaging.
2.
Place the dryer on a clean, dry concrete floor strong enough to support the machine. DO
NOT place the dryer on a carpet with long fibers, as it may impede air circulation.
3.
Let the dryer stand for at least 24 before first using the appliance.
Location Requirements
The dryer must not contact with a wall or adjacent furniture to prevent the dryer from overheating.
The vents on the back wall and the air exhaust opening on the front side of the dryer should
never be obstructed. Use the clearances outlined below for optimum dryer operation:
Install the dryer in a properly lit, ventilated room, with an ambient temperature between 50°F
(10°C) and 77°F (25°C). Using the dryer in a room colder than 50°F degrees may result in water
accumulating inside the dryer or water in the condensate tank and pump freezing, which may
damage the dryer.
Do not place the dryer a small room, as the drying process may take longer due to a
limited amount of available ambient air.
NOTE: Install the dryer in a location where the door can be freely opened without coming in
contact with any walls or doors.
4" (10 cm)
2" (5 cm)
4" (10 cm)
Bekijk gratis de handleiding van Summit SLS24W3P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Summit |
| Model | SLS24W3P |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4118 MB |
