Handleiding
Je bekijkt pagina 10 van 32
10
Built-in Under-counter Instructions
Make sure your installation does not block the front ventilation
grille. The unit is designed to fit under worktops.
If the fully integrated unit is to be installed to fit the kitchen
plinth, make sure that the ventilation gaps in the plinth are at
least 46in
2
(300cm
2
) and remove the ventilation grilles, so that
warm air can disperse unhindered. Otherwise, the appliance
has to work harder, resulting in an increase in electricity
consumption.
NOTE: When pushing the appliance into the niche, make sure
that the main cable does not get trapped.
Model No.
a
(Inch/mm)
b
(Inch/mm)
c
(Inch/mm)
A
(Inch/mm)
B
(Inch/mm)
C
(Inch/mm)
FF1532BSS
34" / 864
22¾" / 575
14⅞" / 377
34⅛" / 866
22¾" / 575
15" / 381
FF64BSS
34" / 864
23½" / 596
23½" / 596
34⅛" / 866
23⅝" / 600
23⅝" / 600
AL54IF
32" / 813
22¾" / 575
23½" / 596
32⅛" / 816
22¾" / 575
23⅝" / 600
ASDS1523
32" / 813
18" / 455
14⅞" / 377
32⅛" / 816
18" / 455
15" / 381
SDHR1534
34" / 864
18" / 455
14⅞" / 377
34⅛" / 866
18" / 455
15" / 381
ASDS2413
32" / 813
18" / 455
23½" / 596
32⅛" / 816
18" / 455
23⅝" / 600
SDHR2444
34" / 864
18" / 455
23½" / 596
34⅛" / 866
18" / 455
23⅝" / 600
FFRF3070B
34" / 864
23½" / 596
29½" / 750
34⅛" / 866
23⅝" / 600
29¾" / 755
NOTE:
1. Models SCFF1533BSS, DBAR1522 AND DBFZ1556 have the same size as FF1532BSS.
2. Models SCR610BLSD, FFRF24SS, SCFF53BSS,
DBAR2427, DBAR2430, DBFZ2457
AND DBFDRF2497
have the same size as FF64BSS.
3. Models ALFZ53, LFZ24A, SCFF53BSSADA, ALFZ53IM, DBAR2421ADA, DBFZ2451ADA
and DBFZIM2452ADA have the same size as AL54IF.
4. Model DBAR1523ASD has the same size as ASDS1523.
5. Model DBAR1525SD has the same size as SDHR1534.
6. Model DBAR2424ASD has the same size as ASDS2413.
7. Model DBAR2426SD has the same size as SDHR2444.
8. Model DBFDRF3098 has the same size as FFRF3070B.
Anti-tip Bracket Installation
To reduce the risk of tipping the unit by abnormal usage or improper loading, the appliance must be
secured by properly installing the anti-tip device packed with the appliance.
1. Place the anti-tip bracket on the floor as shown in the figure. An anti-tip bracket must be
installed on the left side.
2. Mark the locations of the 4 holes of the anti-tip bracket on the floor.
3. Use a 5/16” masonry drill bit and insert plastic anchors.
4. Secure the bracket onto the floor using screws.
5. Slide the appliance into position and make sure the leg engages the anti-tip bracket.
NOTE: If the unit is relocated, the bracket must be removed and reinstalled in the new location.
Bekijk gratis de handleiding van Summit SDHR2444PNR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Summit |
| Model | SDHR2444PNR |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3296 MB |
