Handleiding
Je bekijkt pagina 26 van 32
26
Make sure the water supply is ON and lower the metal arm on the ice maker to its ON position. As
soon as the inner mechanism reaches the proper temperature, the ice maker will fill the mold with
water.
The first cubes may be small because of air in the water line. Later cubes will be of standard
crescent moon type size.
For the first time to use,
• Let the ice maker make ice for 1-2 days.
• Discard the first 2-3 batches of ice to remove the impurities in the water supply system.
When the ice bucket is full, the ice making mechanism will automatically shut off.
Ice delivery may be interrupted by raising the metal arm to the OFF position.
If the ice maker is not used regularly, it is recommended that the ice bucket be emptied periodically
to insure fresh ice.
Temperature Alarm / Door Alarm
An audible alarm sounds if the storage temperature is not cold enough. The temperature display
flashes at the same time.
The cause of the temperature being too high may be:
– Warm fresh food was placed inside
– Too much warm ambient air flowed in when rearranging and removing food
– Power failure for some time
– The appliance is faulty
The audible alarm is automatically silenced, and the temperature display stops flashing when the
temperature is sufficiently cold again.
If the door has been left open for more than 60 seconds, the alarm will sound. Pressing the
POWER key once can switch off the audible alarm.
Door Lock
Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the Instruction Manual. Insert the key into
the lock and turn it counterclockwise to unlock the door. To lock the door, do the reverse operation,
making sure the metal pin is engaged completely. Remove the key and put it in a secure place for
safekeeping.
Shelves
(Only for Models FF1532BSS / SCFF1533BSS / AL54IF / FF64BSS / SCFF53BSS / FFRF24SS.)
To prevent damaging the door gasket, make sure to have the door all the way open when pulling the
shelves out of the rail compartment.
Any of the shelves can be removed to store larger items.
When removing the shelf from the rail compartment,
make sure to remove all items first. Then move the shelf
to the position where the notch of the shelf is exactly
under the plastic post and lift the shelf. In order to
replace the shelf, repeat the steps described above in
reverse.
CAUTION: When removing or replacing the shelf, use caution not to scratch the sides of the unit.
Cantilevered Shelves
Bekijk gratis de handleiding van Summit SDHR1534PNR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Summit |
| Model | SDHR1534PNR |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3296 MB |
