Handleiding
Je bekijkt pagina 15 van 24
15
For the SCR610BLSD model:
1. Use a screwdriver to remove the screws on the side of the
door where the handle is to be installed.
2. Align the handle (2) with the screws (1) removed as
above.
3. Tighten the screws using a Phillips head screwdriver until
the handle is both flush and secured tightly against the
door side (3).
NOTE: (DO NOT over-tighten as this will cause damage to the
stainless steel door surface.)
OPERATING YOUR APPLIANCE
It is recommended that you install the appliance in a place where the ambient temperature is
between 72º and 78ºF (23º to 26ºC). If the ambient temperature is above or below the
recommended temperatures, the performance of the unit may be affected. For example, placing your
unit in extremely cold or hot conditions may cause interior temperatures to fluctuate. The expected
temperature setting may not be reached.
Control Panel
ON/OFF Power
To turn the appliance off, press and hold the key for 5 seconds until the temperature display goes
out. To turn the appliance on, press and hold the key for 1 second until the temperature display
lights up.
NOTE: Pressing this key once can switch off the audible alarm when the alarm is on.
Light
To turn the interior light on/off, lightly touch and hold the key for 5 seconds. The interior light
indicator will light up or go out to confirm the selection. The interior light indicator is the dot at the
bottom right of the display.
Up +
Used to increase (warm) the set temperature by 1°C/1ºF.
Down -
Used to decrease (cool) the set temperature by 1°C/1ºF.
1
2 3
Bekijk gratis de handleiding van Summit SCR610BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Summit |
| Model | SCR610BL |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2518 MB |
