Summit MESAMN35 handleiding
Handleiding
Je bekijkt pagina 9 van 16
8
Installing the Wall Cabinets
(Sold Separately)
Wall cabinets are available as optional
accessories and are not included with the
unit. Installation hardware is not supplied.
Please consult a contractor for correct
installation.
1. Select appropriate hardware based on your
wall type and the weight of the cabinets.
2. Measure and mark the desired height and
position of the cabinets on the wall. Use a
level to ensure accuracy.
3. Locate and mark stud positions, then drill
pilot holes through the back of the cabinet.
4. Secure the cabinet to the wall using screws
long enough to provide a firm hold.
5. Setup
Attaching the Toekick
1. Align with the front legs and
snap into place.
Refer to page 6 of the manual if the
legs need to be replaced before
attaching the toekick.
Attaching the Knobs
1.
Attach knobs to the cabinets and
drawers and screw them into place.
2.
Ensure they’re snug but not overly
tight, which could damage the
materials.
Adjusting the Shelf with Shelf Pins
To adjust the shelf height inside your cabinets:
1. Reposition the pins in different holes to set
the shelf at the desired height.
2. Ensure the shelf is stable and securely
positioned.
Adjusting the Cabinet Door
To adjust the overlay and projection of the cabinet
doors, use a Phillips head screwdriver to turn the
screws on the hinge till the doors align.
1.
Overlay Adjustment (Left/Right): The screw
closest to the cabinet door.
2.
Projection Adjustment (Front/Back): The screw
furthest from the cabinet door.
3.
Check that doors open and close evenly once
adjustments are complete.
Bekijk gratis de handleiding van Summit MESAMN35, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Summit |
| Model | MESAMN35 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2009 MB |
