Handleiding
Je bekijkt pagina 9 van 39
1.2 Installation Warnings
Before using your fridge freezer for the first
time, please consider the following points:
• The operating voltage for your fridge
freezer is 115-127 V at 60Hz.
• The plug must be accessible after
installation.
• Your fridge freezer may emit an odor
when first operated. This is normal, and
the odor will fade as it cools.
• Before connecting your fridge freezer,
ensure that the information on the data
plate (voltage and connected load)
matches the mains electricity supply. If in
doubt, consult a qualified electrician.
• Insert the plug into a socket with an
efficient ground connection. If the socket
has no ground contact or the plug does
not match, we recommend you consult a
qualified electrician for assistance.
• The appliance must be connected
with a properly installed fused socket. The
power supply (AC) and voltage at the
operating point must match with the
details on the name plate of the appliance
(the name plate is located on the inside
left of the appliance).
• We do not accept responsibility for any
damages that occur due to ungrounded
usage.
• Place your fridge freezer where it will not
be exposed to direct sunlight.
• Your fridge freezer must never be used
outdoors or exposed to rain.
• Your appliance must be at least 20 inches
away from stoves, gas ovens and heater
cores, and at least 2 inches away from
electrical ovens.
• If your fridge freezer is placed next to a
deep freezer, there must be at least 1
inch between them to prevent humidity
forming on the outer surface.
• Do not cover the body or top of fridge
freezer with lace. This will affect the
performance of your fridge freezer.
• Clearance of at least 6 inches is required
at the top of your appliance. Do not place
anything on top of your appliance.
• Do not place heavy items on the appliance.
• Clean the appliance thoroughly before use
(see Cleaning and Maintenance).
• Before using your fridge freezer, wipe all
parts with a solution of warm water and a
teaspoon of sodium bicarbonate. Then,
rinse with clean water and dry. Return all
parts to the fridge freezer after cleaning.
• Use the adjustable front legs to make sure
your appliance is level and stable. You can
adjust the legs by turning them in either
direction. This must be done before placing
food in the appliance.
• When the product is operating, the side
panels may become noticeably warm. This
is normal.
• Install the plastic distance guide(s) on the
condenser (black vanes
at the rear of the
appliance) by turning it
90° (as shown in the
figure) to prevent the
condenser from touching
the wall.
• The distance between the appliance and
back wall must be a maximum of 3 inches.
1.3 During Usage
• Do not connect your fridge freezer to the
mains electricity supply using an
extension lead.
• Do not use damaged, torn or old plugs.
• Do not pull, bend or damage the cord.
• Do not use plug adapter.
• This appliance is intended for adult use
only. Do not allow children to play with
the appliance or hang from the door.
• Never touch the power cord/plug with wet
hands. This may cause a short circuit or
electric shock.
EN - 6
Bekijk gratis de handleiding van Summit CM42PL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Summit |
| Model | CM42PL |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4299 MB |
