Handleiding
Je bekijkt pagina 7 van 44
subzero.com | 7
90° Door Stop
The door stop pins provided with the unit limit the door
swing to 90°.
IMPORTANT NOTE: If a 90° door opening is desired, the
pins must be installed prior to installing the unit into the
opening.
To install, open the door to approximately 80°. Insert one
hinge pin into each hinge. Refer to the illustration below.
DOOR STOP PIN
90° door stop
Anti-Tip Bracket
WARNING
To prevent the unit from tipping forward, the anti-tip
bracket must be installed.
The anti-tip bracket should be attached to the wall behind
the unit with the bracket flange located 1/4"
(6) above the
top of the unit. Refer to the illustration below. Failure to
properly position the anti-tip bracket will prevent proper
engagement.
1
/4" (6)
ANTI-TIP
BRACKET
Anti-tip bracket
Site Preparation
Bekijk gratis de handleiding van Sub-Zero DEU2450RR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sub-Zero |
| Model | DEU2450RR |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4541 MB |
