Structural Concepts Reveal NR4855DSV handleiding

Niet gecategoriseerd

Structural Concepts

24 pagina's

PDF beschikbaar

Handleiding

OVERVIEW / COMPLIANCE / LAMP REPLACEMENT PRECAUTIONS / WARNING / WIRING DIAGRAM

ELECTRICAL HAZARD WARNING

Risk of electric shock. Disconnect power before servicing unit.

CAUTION! More than one source of electrical supply is

employed with units that have separate circuits.

Disconnect ALL ELECTRICAL SOURCES before servicing.

WARNING

ELECTRICAL

HAZARD

OVERVIEW

• Cases should be installed and operated according

to this operating manual’s instructions to insure

proper performance.

• Improper use will void warranty.

COMPLIANCE

• Performance issues when in violation of applicable

NEC, federal, state and local electrical codes are

not covered by warranty.

LAMP REPLACEMENT PRECAUTIONS

• Following lamp replacement guidelines can prevent

damage to unit.

• Please read carefully!

ELECTRICAL HAZARD WARNING

• Please read the important warning in this document

carefully as it can prevent injury or death.

WIRING DIAGRAM

• Each case has its own wiring diagram folded and in a packet.

• Wiring diagram placement may vary (near ballast box, field

wiring box, raceway cover, or other related location).

WEIGHT LOADS ON GLASS / PREVENTING SAGGING

• Caution! To prevent sagging or breakage of glass, do not

exceed 5 LB (2.3 KG) weight load per top glass section

(between vertical supports).

• To prevent scratching or marring, do not place ANY items on

glass.

COMPLIANCE

This equipment MUST be installed in compliance with

all applicable NEC, federal, state and local

electrical codes.

ATTENTION

CONTRACTORS

CAUTION! LAMP REPLACEMENT PRECAUTIONS

LED lamps reflect specific size, shape and overall design.

Any replacements must meet factory specifications.

CAUTION

WIRING DIAGRAM FORMAT & LOCATION

• Each case has its own wiring diagram folded & in its own packet.

• Wiring diagram placement may vary; it may be placed near field

wiring box, raceway, or other related location.

CAUTION!

• To prevent sagging or breakage, do not exceed 5 LBS (2.3 KG)

weight load per top glass section (between vertical supports).

• To prevent scratching or marring, do not place ANY items on glass.

LBS

Bekijk gratis de handleiding van Structural Concepts Reveal NR4855DSV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.