Structural Concepts Reveal NR4840DSSV handleiding

Niet gecategoriseerd

Structural Concepts

21 pagina's

PDF beschikbaar

Handleiding

INSTALLATION: TOE-KICK & REAR PANEL REMOVAL / REMOVING CASE FROM PALLET

Toe-Kick

Lower

Pallet Rubber Shipping Block Shipping Bracket

1. Remove Front Toe-Kick

• To prevent damage to case, remove front

toe-kick from case before removing from pallet.

• Toe-kick is held in place by magnets only.

• Place front toe-kick in secure location while

removing case from pallet.

2. Remove Lower Rear Panel From Case

• To prevent damage to case, lift lower rear

panel UP and OFF case.

• Lower rear panel is held in place by magnets.

No screw removal is required.

• Place lower rear panel in secure location

while removing case from pallet.

3. Removing Case From Pallet

• Use Phillips driver to remove screws

from shipping brackets. Remove and

discard shipping brackets from pallet.

• Place J-bar/pry bar under base frame.

Raise case up from pallet to take

weight off casters.

• With case raised, lower casters all the

way down against pallet (see next

step for detailed instructions on

lowering or raising casters).

• Remove rubber shipping blocks.

Illustrations Shown May Not

Exactly Reflect Every Feature or

Option of Your Particular Case.

Bekijk gratis de handleiding van Structural Concepts Reveal NR4840DSSV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.